You can compare a maximum of 3 products
Plast-i-Weld is a solvent cement that softens and melts the plastic (not a glue) bonding time is usually between 10-15 seconds. Full cure is approximately 10 minutes, depending on room temperature. Specially designed for the Touch-n-Flow System.
Glass bottle of liquid gloss varnish solution that will help with decal application and give dull canopies or clear parts a new extra shine. Liquid shyne can be applied with an airbrush or a brush or used as dipping solution for canopies.
Acrylic Paint Set Civilian Aircraft ( 6x 5 ml containers ). For fans of passenger aircraft. The set includes the Aqua Color paints most commonly used when building models from this field.
Specially designed for use with photo-etched parts, the sharply pointed tip can cut into the narrowest joints, preventing accidental bending of parts during cutting.
Long-nosed pliers specially designed for use with photo-etched parts. Guaranteeing precision bending for all sized pieces, the tip of the pliers is designed for use with small parts while the side is meant for bending large parts.
Pointed self-closing tweezer
Designed for scribing recessed panel lines onto the surface of your model. The Bare-Metal Panel Scriber will actually take out a hair of plastic each time you draw it along and leave a nice recessed line.
For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
120 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
1500 Grit - 8 stix
For those "Hard-to Get at" areas.
Precision Stix Micro Sanders
Deluxe Pack (multiple grits)
For those "Hard-to Get at" areas.
Standard EDUARD photo etch set. Note that this set is UNPAINTED !
Luftwaffe fighter seat belts PRE-PAINTED IN COLOUR
Coming soon ! Civil airport extendible display base - set of 4 pieces (depicting rectangular concrete panels). I am assuming these are just printed heavy paper panels. Will confirm upon arrival. Note the price !
#22 Curved Edge Blade - Replacement Blades, pack of 5
Un-Cure is used to de-bond cured super-glue. Very useful when Hubby or Junior glue their fingers together while trying to fix a broken diecast model !
★This handy set includes three brushes commonly required in the finishing of plastic models. ★Horse-hair bristle brushes feature a wooden handle designed to reduce strain on the hand. ★Includes No.3 (8mm width) and No.01 (3mm) flat brushes, plus a small p
★This handy set includes three brushes commonly required in the finishing of plastic models. ★High Finish (HF) brushes feature specially designed resin bristles for use with plastic model paint. ★Includes No.2 (6mm width) and No.0 (4mm width) flat brushes